Centrifugal Process Pumps by Flowchem Engineering Private Limited

Centrifugal Pumps

On offer from us is a wide range of Centrifugal Process Pumps. These are developed in accordance with international and national quality standards. The products offered by us are tested on various parameters to ensure their optimum quality. Our this range is manufactured by us in back pull-out construction , horizontal, foot mounted, single stage, end suction and top center line discharge, confirming to DIN 24256 / ISO 2858, standards and in general confirming to API 610 as well. Furthermore, we provide our product range at industrial leading prices.

Applications:

INDUSTRIAL SERVICES

• Corrosive / Abrasive Liquids

• Water Treatment & Distribution System

• Organic/Inorganic Chemicals

• Bulk Drugs & Pharmaceuticals

• Dyes & Intermediates

• Oil Extraction And Waste Oil Refineries

• Cooling Towers

• Chemicals, Dyes & Intermediates

• Hydrocarbons / Volatile Liquids

• Effluent Treatment Plants

• Heating & Air Conditioning Plants

• Thermic Fluid / Hot Oil

Construction Options for Centrifugal Process Pumps

• Closed or Semi Open impeller are available of our product range

• To minimize Axial Thrust and Gland Leakage, impellers are provided either with Back Vane or Back Wear Ring

• To meet ISO 2858 requirements, flange rating PN 16 to PN 64 and drilled to DIN standard 

• We also provide Flange Rating to BS / ASA

• Various Shaft Sealing provided by us

• Standard Bearing / Special Heavy Duty Bearing arrangements available.

• Gland Packing ( ASB. / NON ASB. Depending on the service.) 

• Mechanical Seals (Single or Double Mechanical Seal Arrangements.). 

• Moulded Graphite Rings.( GRAFOIL PACKING ) 

• Jacketing for heating/cooling offered for Casing, S/Box, Casing Pedestal and Bearing- Housing.

Materials of Construction for Centrifugal Process Pumps:
 

• GUN METAL / BRONZE

• NICKEL & Ni-ALLOYS, NI-RESIST, 2% NiCI, R 55, HASTELLOY -B / \C

•  AS PER ASTM / DIN STANDARDS 

• CF8, CF8M, CF3, CF3M (SS316L), ALLOY 20, CD4MCu 

• GRADED GREY CAST IRON 

• CARBON STEEL(WCB) / ALLOY STEEL

Operating Range for Centrifugal Process Pumps:
 

• Pump sizes - DN - 32 mm to 200 mm.

• Speed - n - 960 / 1450 / 2900 rpm

• Temperature -10 ºC to +250 ºC

• TDH - H - up to 140 MLC

• Capacity - Q - up to 400 M³/hr

• Working Pressure 40 Bars