Fully Automatic Phase Sequence Corrector by Supreme International

For any 3 Phase Machines (or) Equipments like AC,UPS, Lifts and Motors, Motor-pumps 3 Phase incoming supply has to be given in the right sequence, i.e (R,Y,B).
The Phase angle of 120° between the phases R,Y,B is to be maintained to run 3 phase Motors.

If the sequence is changed

• motor tends to rotate in the reverse direction.
• AC,UPS and Lifts, they will stop working due to the inbuilt sequence protection feature.
• Only when the input sequence is changed manually, they start functioning.

SUREME FULLLYAUTOMATIC PHASE SEQUENCE CORRECTOR (SAPSC) always gives an output in the right sequence and maintains 120° between phases, even if the input sequence is changed for any number of times.

SALIENT FEATURES

• FULLY AUTOMATIC
• NO MANUAL INTERVENTION
• SINGLE PHASE PREVENTION
• HIGH/LOW VOLTAGE PROTECTION
• VOLTAGE IMBALANCE PROTECTION BETWEEN PHASES
• OUTPUT IN THE RIGHT SEQUENCE(R,Y,B)

STANDARD RATING

• 30 Amps, 40A, 60A, 100A, 125A, 150A, 200A, 250A, 300A, 400A up to 630 Amps

The Key Features Of Our RYB Phase Sequence Correctors Are As Under:

• Suitable for correcting the RYB phase sequence, whenever the sequence is changed or reversed
• For Three Phase UPS, during sequence changed or reversed, UPS will start use the battery power & battery may become empty within half or one hour
• 3Ph air conditioner will be tripped off, due to sequence reversal & the entire office will be suffering or disturbed because of AC failure
• Avoid damages during phase sequence changes or reversal
• The sequence corrector will switch off, during the single phasing or imbalance voltage occur & later, auto-reset after restoration
• No break downs of Lifts, UPS, Machineries, 3 Ph. Air conditioner or any motors or 3-phase system due to any change in sequence

IT IS CUSTOM BASED PRODUCT CAN BE MADE AVAILBLE IN THE SHORTEST SPAN OF TIME AS PER YOUR SPECIFICATION.