Hydrocont SN50 Level Measuring Instrument by Emco Group India

Hydrostatic filling level measurement, suitable for liquids in hygienic applications

with dry capacitive measurement system
with TFT-display, 4-20mA or 0-10V output and up to 4 pnp switching outputs

• High accuracy fill level measurement
• Various food flanges
• Suitable for CIP and SIP cleaning
• Electronic and display rotatable
• Integrated digital 4...20mA  2-wire-electronic or 0...10V 3-wire-electronic

The devices of the series Hydrocont® SN50 with integrated digital evaluation electronic are compact sensors for measuring and monitoring of fill levels.
The excellent characteristics like highest strength against pressure and pressure blows, high resistance against chemicals and corrosion, very good insensitiveness against temperature shocks and EM interference, highest accuracy and long term stability and also low influence of temperature makes it possible to use the sensor in all pressureless containers for liquid medium like water, waste water, solvents, oil, sludge, grease, cleaning agents, etc.

The level measurement system Hydrocont® SN50 is built in the wall of the medium container.
The medium contacts directly the ceramic membrane of the sensor without using a pressure mediator liquid and causes there a deflection of the membrane because of the hydrostatic pressure of the medium.
At the maximum deflection the membrane contacts a robust ceramic carrier and because of this, the membrane come through over pressure of e.g. 80-times of nominal load at a sensor with a pressure range of 0...50 mbar without damage.
The fill level proportional pressure signal of the ceramic membrane is recorded from a processor with high resolution, adjusted according to the settings and converted into a high resolution output signal of 4...20mA or 0...10V.

By using optical keys and an TFT-display the sensor measurement range, the display, the PNP-switching outputs and the damping can be adjusted or the behaviour in the case of failure and the release of the fast adjustment can be set.
The switching state of the up to 4 PNP-switching output is signalled by the TFT-display.