Monoblock Coupled Pumpsets by Emerge Wagner India Private Limited

SAER Monobloc Pumps are designed and manufactured for optimum efficiency to cater to different needs of water handling. The pump range is suitable for a wide range of applications in Commercial, Industrial areas, domestic Applications. SAER mono bloc pumps are available in various series depending on applications requirements, like pump couple with motor, stub shaft pumps ETC.

APPLICATIONS

• Recycling plants
• Heating, air conditioning
• Heat recovery
• Plants of water supply procurement,
• Pressurizing units
• Fire-fighting systems.
• SPECIAL VERSIONS
• Constructive materials
• Different mechanical seals
• Mechanical seal normalized according to UNI EN 12756

CLOSE COUPLED ELECTRIC PUMPS

Operation Condition:-

Max Head  :  100 M (328 ft)
Max Capacity  :   400 m3/hr
Temp of Pumped Liquid :  -15^oC to 120^oC
Frequency   :  50 Hz
Rpm  :  2900
Sucking DN  :  50 to 100 mm
DN capacity : 32 to 80 mm

Pumps Construction:-

Pump body with dimension and performances according to EN 733 rules, closed impeller dynamically balanced and with balance holes for the balancing of the axial thrust. Shaft completely in stainless steel, greased ball bearings, flanges (UNI EN 1092-2): up to DN 150: PN16, from DN 200:PN10.


Centrifugal pumps with Stub Shaft

Operation Condition:-

Max Head : 102 M (334ft)
Max Capacity : 255 m3/hr
Temp of Pumped Liquid : -15^oC to 120^oC
Frequency : 50 Hz
Rpm :  2900
Sucking DN : 50 to 100 mm
DN capacity : 32 to 80 mm

Pumps Construction:-

MG1-MG2 electro pumps are of the single-impeller, single-block centrifugal type with rigid coupling, coupled to a standard B3/B5 form asynchronous motor. MG1: bare shaft pump, MG2: pump with motor. The coupling is obtained by means of a block with ball bearing on which the pump shaft is secured and integrated with a rigid coupling. The motor unit and the rotating part of the pump can be taken away without removing the pump body from the system piping.