Motorised Pumps by Cenlub Industries Limited

This is mini hydraulic power pack fitted with a motor and rotary positive displacement pump.

The unit is designed for intermittent run only and is best suited for Single Shot Lubrication.

Unit is fitted with a suitable pressure switch, float switch and a transparent reservoir (for visually checking the oil level).

During ON cycle, the electrically driven pump discharges the oil with high pressure, adjustable between 25-28 bars, with the help of an in-built relief valve, which is also safeguarding the system from over–loading and the pressure can be read on the Pressure Gauge fitted on the unit.

During OFF cycle the pressure in the lubrication line is reduced to 1 kg/sq.cm. and so on.

The system is also provided with a Bleed Valve near the outlet port to automatically bleed air if entrained in system.

For vertical mounting of the unit, two holes are provided at the back of the system.

There is an inbuilt check valve and pressure reducing system incorporated in the pump.

Outlet port is suitable for 6mm OD tube.

cenlub
Discharge of Pump : 350 cc / min.
Reservoir Capacity : 3.0 ltrs. (in polycarbonate material)
Motor : 0.09 KW, 1500 rpm, 3 Phase, 415 V
Relief Valve : Pre set at 20 kg/sq.cm.
Pressure Switch : 42 V (Max), 0.2 Amp (Max), Pre set at 18kg/sq. cm, 1 NO + 1 NC contact.
Float Switch : 42 V (Max.) 0.2 Amp (Max.), 1 NC contact (oil filled)
Suitable oil Viscosity : Between 32 to 460 cSt / 40 degrees celcius.