V6 And V8 Submersible Pump Sets by Vishwanath Pump Private Limited

VPL 150 mm (6”) Borewell submersible pumpsets are with different materials of construction together with extremely hardwearing bushes makes highly durable pump. Radial flow submersible pumps are supplied with stainless steel impellers and stage castings and mixed flow pumps are supplied with LTB-2 impellers to give better performance and longer life and other vital components like check valve housing, mixed flow stage bowls and suction inter connector are made of graded cast iron. The optimal design of impellers and diffusers offers best possible hydraulic efficiency. These pumps are powered by a water filled, rewindable submersible motor suitable for continuous duty. The stator is wound with special water proof synthetic film insulated copper winding wires and made up of low watt loss steel laminations assembled under pressure and rigidly locked in stainless steel stator shell. Specially designed high performance thrust bearings (SS with Carbon) are used to withstand axle and down thrust loads with minimum wear and tear. Dynamically balanced rotor gives vibration free and noise free operation, thereby increases efficiency and life cycle of the motor.

Power Range	1.1kW – 26 kW (1.5HP – 35HP)
	Speed	2880 RPM
	Version	200 – 240V, Single Phase, 380 – 415V, Three Phase, 50 Hz, A.C. Supply
	Maximum total head	503 metre (50.3 bar)
	Maximum flow rate	79200 LPH (79.2 M3 / Hr)
	Nominal outlet size in inches	1 ½, 2, 2 ½, 3 & 4
	Degree of Protection	IP 58
	Maximum outer diameter in mm	143
	Direction of Rotation	Clockwise from driving end
	Thrust Load	1500 lbs. 1.1kW to 4.5kW, 3500 lbs, 5.5 kW to 15kW, 6000 lbs. 18kW to
	Minimum cooling flow along the motor	0.15 m/sec
	Type of Duty	S1 (continuous)
	Method of starting	Single Phase, Capacitor Start and Capacitor run (CSCR), Three Phase, DOL upto 5.5 kW, SD upto 26 kW.
	Maximum starts per hour	12 times