Victaulic DN350 Style W07 AGS Vic-Ring Rigid Coupling System 14 Inch Rigid by Sanjay Kamle

The patented Style W07 AGS (Advanced Groove System) coupling is comprised of two hous ings and is designed to provide a strong connection for large diameter pressure piping systems. It is the first flat pad, metal-to-metal, rigid coupling to be offered within this size range. Its unique wedge-shaped key profile results in easier initial assembly alignment. The Style W07 AGS coupling in 26 – 50"/650 – 1250 mm sizes, features lifting lugs integrated into the housings to help ease handling during installation.
The Style W07 coupling is mounted onto an external ring utilizing a patented AGS groove profile. The Vic-ring system provided by Victaulic maintains full pipe wall thickness for slurries, tailings, and a variety of other services.
The Style W07 AGS Vic-Ring system is available for pipe sizes ranging from 12 – 48"/300 –1200 mm. The coupling used to join these pipe sizes will always be the next largest size (ex: 12"/300 mm pipe requires the use of a 14"/350 mm coupling). The larger size is needed to allow for the extra outside pipe diameter the AGS ring adds to the pipe.Style W07 AGS couplings are rated up to 350 psi/2400 kPa for 14 – 24"/350 – 600 mm piping systems, to 300 psi/2065 kPa for 26 – 42"/650 – 1050 mm, and to 232 psi/1600 kPa for 44 – 50"/110 0– 1250 mm Style W07 AGS couplings are provided with FlushSeal gaskets for a variety of services. Please specify gasket grade when ordering. Please refer to publication 05.01 for gasket service ratings.

Features :

• Coupling installs on the supplied ring to maintain full pipe wall thickness on abrasive systems
• Vic-Rings-: Victaulic Type “D” Vic-Rings
• Material-: Carbon Steel to ASTM A 105 or equivalent
• * Optional-: ASTM A105N (Specify at time of order)
  Other materials available upon request contact Victaulic for details.
• Housing-: Ductile iron conforming to ASTM A-536, grade 65-45-12.Ductile iron conforming to ASTM A-395, grade 65-45-15, is available upon special request.Housing Coating:Orange enamel.
  Optional-: Hot  dipped galvanized and others.
  Coupling Gasket:(specify choice*)
• Grade “E” FlushSeal EPDM-: EPDM (Green color code). Temperature range –30°F to +230°F /–34°C to +110°C. Recommended for cold and hot water service within the specified temperature range plus a variety of dilute acids, oil-free air and many chemical services. UL classified in accordance with ANSI/NSF 61 for cold +86°F/+30°C and hot +180°F/+82°C potable water service. NOT RECOMMENDED FOR PETROLEUM SERVICES.
• Grade “T” FlushSeal nitrile-: Nitrile (Orange color code). Temperature range –20°F to +180°F/–29°C to +82°C.Recommended for petroleum products, airwith oil vapors, vegetable and mineral oils within the specified temperature range. Not recommended for hot water services over +150°F/+66°C or for hot dry air over +140°F/+60°C.
• Grade “L” FlushSeal silicone-: Silicone (Red color code). Temperature range –30°F to +350°F/–34° C to +177° C. Recommended for dry heat, air without hydrocarbons to +350°F/+177°C and certain chemical services.
  * Services listed are General Service Recommendations only