Borewell Submersible Pumpsets by Emerge Wagner India Private Limited

SAER Submersible pumps represent state-of-the-art hydraulic design. Built to deliver optimum efficiency during periods of high demand, provide low long-term costs and high operating reliability regardless of the application.

APPLICATION

Suitable for lifting, pressurizing and distribution in Civil and industrial installations, Autoclave and cistern inlets, Washing plants, Irrigation systems Draws from wells of min diameter of 158 mm, tanks or natural basins.

RADIAL SUBMERSIBLE ELECTRIC PUMPS

Operation Condition:-

• Max Head : 955 M (3133 ft.)

• Max Capacity : 210m³/ Hr

• Pumps size : 4” 6” 8” 10”

• Temp of Pumped Liquid : 0^oC to 40^oC

• RPM : 2900

• Maximum immersion depth : 200 m under liquid level

• Max pressure : 22 bar

• Grain size of silt : 200gm/m3

Pumps Construction:-

• Impellers : Polycarbonate loaded with fiber glass.

• Diffusers : Noryl (techno polymer) loaded with fiber glass.

• Shaft : AISI431 stainless steel (on request, AISI316), with

• Outlet and suction support : Brass or coated carbon steel (on

• External shell : Stainless steel AISI304.

Other Materials Available on offer :-

• Carbon Steel, Brass, SS-316, SS-304, Noryl, Cast Iron

Features:-

• Complete unit of pump with electric motor oil bath range CL95

• Hydraulic part to be connected with 4” submersible motors with coupling following NEMA MG1-18.388

• The FS 98 series uses axial sliding floating impellers, which avoid the jam up of the pump even with the presence of sand.

• Outlet complete with non-return ball valve.

• Driving bushings in anti-wear rubber.

• Components realized with particular materials which assure a high wear resistance.

• This pump is an ideal solution in pumping water with suspended sand particles up to 300 g/m³.

SEMI-AXIAL SUBMERSIBLE ELECTRIC PUMPS

Operation Condition:-

• Max Head : 388M (1273ft)

• Max Capacity : 725m³/hr

• Pump Size : 6”, 8”, 10”, 12”, 14”

• Temp of Pumped Liquid : 0^oC to 35^oC

• Frequency : 50 Hz

• Rpm : 2900

• Maximum immersion depth : 300 m under liquid level

• Max pressure : 45 bar

• Grain size silt : 300gm/m3

Pumps Construction:-

• Impellers : Cast iron EN-GJL-250 (brass for model K and X)

or FeG450 steel.

• Diffusers : Cast iron EN-GJL-250 or FeG450 steel.

• Shaft : AISI431 stainless steel, with grooved profile.