Centrifugal Monoblock Pump Set by Harihar Industries

Minimum Order quantity : 25 pieces

The pumps are centrifugal, single stage, horizontal type suitable for transfer of cold, clear, fresh water with max temperature 40°C. Built with radial flow impeller rotates on motor shaft, surrounded by volute casing mounted on the motor bracket forming monoset configuration. Due to distinguish impeller design they offer high possibility of use at all points of performance curve without generating cavitation effects.

The motors are dry, air cooled, squirrel cage type, TEFC, 2 pole, B class single/three phase induction motors. They are equipped with high quality ball bearings to take rotating thrust loads with minimum wear and tear. The rated power supply for the pump is 230 V.AC., 50 Hz for single phase and 415 V.AC., 50 Hz for three phase pumps. However, superior quality winding and insulating materials enable them to withstand wide voltage fluctuations.

Available in the range from 0.5 hp to 2.0 hp - single phase with head range from 6 mtr. to 25 mtr., flow rate range 30 lpm to 800 lpm and outlet size range from 1” (25 mm) to 3” (75mm), whereas in the range from 1.0 hp to 7.5 hp three phase with head range from 6 mtr. to 40 mtr. flow rate range from 30 lpm to 1600 lpm and outlet size range from 1” (25mm) to 3” (75mm).

Suitable for applications in farm irrigation, industries, high rise buildings, domestic water supply, hospitals, hotels, sprinklers, fountains, pressure system etc. to lift and transfer water from openwell, pond, river, tank and dam with installing on the surface near to water level.

Features :

• Higher Efficiency
• Lower Power Consumption
• Noiseless Operation
• Easy Installation
• Rewindable Option
• Lower Maintenance
• Operational Cost