Servo Stabilizer 1KVA Single Phase by Sakthi Electrical Control

Servo Stabilizer Supplier Servo Stabilizer Dealer Servo Stabilizer Distributor Servo Stabilizer Exporter Servo Stabilizer OEM Manufacturer Product Specification for "Sakthi Servo Controlled Automatic Voltage Stabilizers With UV/OV Cutoff" Brand Name SAKTHI Frequency 47- 53 Hz Rating 1 KVA to 1500 KVA Temperature Range 0° to 55° C Specifications Met As per IS : 9815 : 1994 Output Voltage 230 V, ±1% Connection Type Star / Star Phase Single Phase Insulation Class B Number of Items in Pack 1 Application Servo Voltage Stabilizers are virtually required at all such places where controlled and constant voltage is one of the most important ingredients. Like Hospitals, Laboratories, various life saving & testing equipments, pharmaceuticals, Research Institute Product Information Sakthi Servo Voltage Stablizer essentially employs a Solid-State circuit, which controls the Servo Motor. The motor is mechanically coupled to the arm of a continuously variable Auto Transformer (Variac) that feeds to the primary of a series control Buck-Boost transformer. The stabilizer output voltage is compared with the reference voltage and the resultant error signal controls the Servo Motor providing true proportional control systems rather than On/off circuits Widely accepted design to suit various conditions. All the phase/s are independently sensed & corrected. Suitable for both balanced/ unbalanced loading & incoming voltage Specifications Output Adjustable: 220 - 240 V AC Type of Cooling: Air / Oil Cooled Speed of Correction: >than 20 V / Sec. Regulation: ± 1.0% from No Load to full load Environment: Designed for indoor continuous operation Key Features Fully Solid State Control Circuit for High Reliability, Synchronous motor drive for high reliability Excellent Regulations as high as + - 1 %, Use of Professional Grade IC's for better stability Zero Wave Form Distortion, Plug in type PCB with Gold Plated fingers for better contacts High Efficiency, Rugged Construction with Low No Load Losses Auto - Manual Operation Facility through selector switch, Volts adjust to set / adjust required voltages Increase / Decrease switch to control output voltages in Manual Mode, Voltmeters to read Input / Output voltages through Selector switch Indications: Output On, Input High/Low, Output Cutoff, Suitable Input / Output connection provision is provided Cyclic & Routine Test done on every unit, 110 V Output can also be supplied Over - Under Voltage Cutoff Protection through Contactor, Overload / Short Circuit protection through MCB/MCCB, Digital Voltmeter / Am-Meter Changeover / By-Pass facility, Built in spike suppressor, Single Phase / Phase Reversal Protection