Submersible Sewage pumps by Vijay Engineering & Machinery Co

• Screened sewage
• Raw sewage
• Contaminated effluents
• Industrial waste water
• Storm water
• Trench and Tunnel water
• Drain water, Mine water etc.

• Constructional Specifications:
• Single stage, single suction pumps with overhung non-clogging impeller
• Pumps offered in stationary as well as transportable arrangements
• The stationary arrangement is supplied with pump connector unit
• The connector unit is connected to pump support bracket with rubber diaphragm to make it leak proof joint

• The radially split casing is provided with integrated delivery nozzle cast
• Suction is axial and delivery nozzle is central and horizontal
• Specially designed semi-concentric casing that reduces radial thrust and ensures vibration-free performance
• Wide volute passage ensures non-clogging operation of the pump

• These are of non-clog type that allows smooth passage of solids
• Offered with single or multi vanes in semi-open, enclosed, or free flow designs to cater to wide applications

• High tensile steel shaft is accurately machined and its ground is supported by two ball bearings in the motor above the impeller
• Designed to transmit the power without undue vibrations and deflections
• It is common for pump and motor of monoblock design

• Two mechanical seals in tandem arrangement are provided to ensure no ingress of water or sewage in motor

• Bearings are grease lubricated and sealed for life, hence maintenance free
• Direction of Rotation: Clockwise when viewed from motor top

• Motor is dry type submersible and cooled by liquid being handled
• Motors are air tested for leak-free operation
• Degree of protection for motor is IP68 as per IS:2147
• Class of insulation : F
• Voltage : 415V /- 10%
• Frequency : 50 Hz. /- 5%
• Type of starting : As per requirement (DOL/Star Delta/ATS)

"We are looking for enquiries mainly from Maharashtra."