LNC-T800 Dual System Mill-Turn Controller by Neutek Power System Private Limited

LNC-T800 is the controller that can control two independent systems simultaneously in mill-turn machine. Users can plan processing path with 4 servo axes and 3 spindle for two systems. Servo axis can also be PMC axis. Two part programs in two independent systems can be arranged by waiting M code. LNC-T800 offers servo axis to do synchronization, switching and overlapping and spindle synchronization function to finish complicate work piece that usual mill-turn can not complete.

Features

• Soft-limit

Switch to the proper soft-limit according to differnt machining positions

• Drilling/Tapping/Boring cycle of end and side faces

Provide multiple kinds of drilling(G83/G87/G187)
Tapping(G84/G88/G188)
Boring(G85/G89/G189)cycles

• Spindle synchronization control and phase control

Both main spindle and secondary spindle can be controlled synchronously for clamping both ends of cylindrical or polygonal workpieces.
Applications of spindle C(H) positioning function is available. Synchronization control and phase control are also available for spindles with induction motors.

• Composite control of servo axes

Part program can be written in System 1 to control X2 axis and Z1 axis for machining and also in system 2 to control X1 axis and Z2 axis for machining.

• Turning/threading simultaneously on the workpiece externally and internally

Individual tool path planning is available for System 1and 2 to perform turning/threading on the same spindle simultaneously.

• Spindle C(H) positioning / C servo axis positioning

Provide clamp signals for the control of spindle pin/dowel or brake. Spindles can be switched to servo axes for positioning at varied angles to fulfill the need of workpiece side face machining.

• Synchronization control of servo axes

 Suitable for the machining of long workpieces such as threading, rigid tapping, or knurling

• Superposition control of servo axis

Provide a move command of an axis relative to the position of a different axis in another system, This function can accomplish profile threading and end-face drilling at the same time. Suitable for Swiss tape lathes.