Aerosol Fire Extinguishing Generator by Evergreen Enterprises

AGS-7 Series designed for generating of gaseous-aerosol mixture which stops the process of flame burning when reaches the necessary concentration.

Generator is made in a shape of cylinder with metal body, on the end part of which the nozzle cap is located. Due to injector which is installed on the generator, the aerosol is actively mixed with air, which significantly reduces the temperature of aerosol stream. It is manufactured in two modifications with protected volumes up to 65 cubic metres (AGS 7/1) and up to 135 cubic metres (AGS 7/2). Modifications also differ by dimensions and weight.

The electrical impulse which comes to the starter* which is installed inside generator, ignites the aerosol forming cartridge. During the burning of it the fire extinguishing aerosol is produced. The aerosol flow penetrates the cooling layer and comes out of generator through the nozzle.

This generator is recommended for use as part of fire extinguishing systems in the premises of medium and large volumes.

Manufacturer guarantees that generator conforms to requirements of technical conditions and GOST if the consumer respects conditions k

which are indicated in the Instruction Manual.
    
    The warranty period is 18 months Lifetime -10 years Operating life - 5 years.

Technical Specification:

Aerosol geerating Cartridge	3.4 kg
Protected Volume	63m3
Net Weight	5.8kg
Diameter x Height	172mm x 355mm
Operating Time	86 /-13sec
Starter*	VR-7.5, VRTH, VEL, VELTH
Starter Impedance	7.5Ohm 2.5-4Ohm
Minium Starter Current	1A 0.4A
Starting Voltage	8-30 V 1.5-24V
Starting Impulse Duration	Not less than 1.5 sec Not less than 0.1 sec
Generator Start-up Delay	<1.5 sec
Operating Conditions	50 Degree C/ 50 Degree C, humidity up to 98%
	mechanical influence 0.5g ar frequency range
	up to 35 Hz