Featured Suppliers
How it works
- Submit an enquiry to a product.
- Wait for a call from nearest supplier from your area.
- Get quote and product details.
- Choose best from them.
Recently Added Suppliers
Product Description
Backed by the team of our experienced professionals, we have been able to manufacture, trade and supply an extensive range of Pneumatically Operated Chemical Injection Dosing Pump. This pump is widely used in different industrial applications for injecting the chemicals. Offered pump is manufactured by our trained professionals using quality approved components with the help of modern technology. The provided pump is available in different specifications as per the demands of the clients.
Dosing pump feature:
Operating cycle:
Extra accessories for pump:
Features:
Standard components:
Dosing pump feature:
- Reciprocating type Plunger Pump
- Operation of Pump with Compressed Air OR Natural Gas
- Plunger Ceramic Coated, Plunger SS 316, Ceramic Plunger
- Flow Control by Stroke Rate with Stroke Timer Device and Stroke Length Variation with an accurate Micro Meter type Stroke length setting Device
- Flow Turn Down Ratio of 100 : 1 (Together by Stroke Rate and Stroke Length adjustment)
- Accuracy ± 2% OR Better ± 1%
- Easy Operation Minimum Working Parts, Field Maintainable of Pump
- Pressure Amplification Ratio 1 : 30
- Maximum Pressure 105 Kg/Cm2
- Input Gas / Air Supply 2 to 5 Kg/Cm2
- Maximum Pressure adjustment by CUT OFF Control of Input Air/Gas Supply from Air Filter Regulator Assembly
- Inbuilt Filter Regulator Assembly and Flow Calibration Pot
- MOC of Pump SS 316, SS 304, or as per liquid parameters
Operating cycle:
- Power Stroke: As the supply Air/Gas from the Air Capsule (Timer) through the Pneumatic Drive Cylinder. The Piston Plunger Assembly is driven down into the Fluid Cylinder, Displacing fluid. The fluid displacement results in an increase in pressure which closes the Suction Valve and opens Discharge Valve. A precise of fluid, corresponding to the stroke of the plunger is discharged.
- Suction Stroke: When the Air/Gas is exhausted from the top portion of the Pneumatic Drive, Cylinder through the Air Capsule (Timer), Air/Gas is then supplied to the bottom portion of the Pneumatic Drive Cylinder in order to return the Piston Plunger to its original position, The Piston Plunger assembly allows the Discharge Valve to close, and the Suction Valve to open, The Fluid chamber is then refilled and ready for the Power Stroke.
Extra accessories for pump:
- Inlet air/gas filter pre-regulator
- Calibration pot
- All built in cabinet valve & fitting
- Tank and piping with or without insulation & level indicator
- Complete skid mounted chemical injecting dosing skid with instrumentation, piping, valves, strainer non return valve, safety valve
- Simplicity in design operation and maintenance
Features:
- Simple Design
- Easy to operate
- Intrinsic safety of Pneumatic Operation
- Stroke Length and Stroke Rate Adjustment
- High Flow Turn Down
- Easy to Installation
- Air / Gas Operated Chemical Injecting Dosing Pump
- 400 Liter CS Tank with Level Gauge and Rock wool Insulation
- Rigid Skid for Easy Handling
- Inbuilt Calibration POT
- SS Interconnection Piping with ball type isolation valve Suction Strainer, Ferrule Fitting for Leak proof operation
- Epoxy Painted for Corrosion resistance
- Piping Deigned for use thick viscose liquid during winter
Standard components:
- Skid frame with Suction / Discharge
- Y Strainer
- Ball Valve
- None Return Valve
- Calibration Pot
- Air/Gas Supply Air Filter
- Air Filter Pressure Gauge
- Dosing Pump
- Pressure Relief Valve
- Discharge Pressure Gauge
- Line Check Valve
- Measuring Liquid point Needle Valve