Crystolite Filtration (down To .05 Micron) by H2O Solution

Using Crystolite™ media in a pressure vessel to provide a micro filtration effect, the Crystolite™ media allows the water to flow through the top distributor on the top of media layer, when suspended solids are held on the highest surface area of the media allows only clean water to flow through the Crystolite™ media. As a result, Crystolite™ can be used to filter down 0.5 microns without clogging. It allows all suspended solids to accumulate on the surface of the Crystolite™ media and are easily back washed to drain. The system can be designed either manual backwash or by using automatic backwash cycle, the backwash cycle is maximum 10 minutes which uses 80% less water then any traditional anthracite or multimedia filters, it is because 90% of the solids are captured on surface and not inside of the Crystolite™ media-bed. This results if the High-tech filtration that can filter solids and particles down to submicron levels at 10 to 15 times the flow rate of all traditional filters. Backwash water reduction is up to 80%.

• Total Suspended Solids
• Sediments
• Turbidity
• Color and Odor
• Adsorption of organic contaminants
• Adsorbtion of inorganic contaminants (e.g. As, Heavy Metals, Radionuclides)

• Feroxyhyte coated Granular Activated Carbon
• Very high surface area
• Chemically Regenerable with OXYDES & OXYDES-P
• No mandatory dosing required
• Light weight media - saves backwash water
• Replacement frequency : every 2 - 5 years