Electric Control Panel by Royal Electrical

All electrical control gear, mains isolating arrangement, starters, contactors, pilot lamp, push buttons, HRC fuses, relays, indicating lamps and interlocking will be housed in a compact control panel and made of CRCA sheets. A mimic diagram with indication lamps showing on/off status of various equipment will be provided on the control panel. All wiring will be neatly/routed and all wire termination will be suitably identified. For illumination, a bulb will be provided. The surface of the panel should be power coated. You have to provide suitable DOL starter along with the over load relay, MCB, Indicating Lamp & push Button for our 5 HP compressor motor supply. The compressor will be provided by us.  You are requested to give one 3 Phase point and  2 single phase 15 Amps. Points outside the panel for our requirement with suitable rating MCB.  We will provide 1 No. 250 VA. 440/220 V. transformer for power supply control and illumination purpose as requested by you.  You are requested to approve the wiring diagram prior to start the work.  All the cables and wires like heater chamber, inlet/outlet pumps, vacuum pumps etc. are of copper made and current density should not more than 1.5 Amps per mm².  The same will be thoroughly checked at the time of our final inspection at your works.