Electromagnetic Flow Meter by Impel Marketing India Private Limited

The instrument works on Faraday's law of electromagnetic induction. The magnetic field is generated around the measuring tube by the instrument. The fluid passing through the measuring tube generates a voltage. This voltage is directly proportional to velocity of the flow. Thus the flow is measured and displayed on the indicator. Mag-Flow 650 provides worry free flow measurement, which measures the flow of any conductive liquid flowing through it. It uses non-intrusive measurement element hence, debris/solids will not interfere with the measurement. Its rugged rubber lining provides outstanding electrical insulating properties. Mag-Flow 650 is well designed for industrial waste water and water industry.

Key Attributes:
Suitable for any type of conductive fluid
Negligible pressure drop
Unaffected by density or viscosity
High turn-down ratio
Ideal for outdoor installation
270° display rotation possible
Communication ready for monitoring/data logging
High accuracy
Reversing flow warning
No moving parts to were and break
All meters individually calibrated

Application of Mag Flow Meter:
Raw Water, Beverage Industry, Pharma & Chemical, Industrial Waste Water, Sewage Treatment, Mining/Minerals Processing

Technical Specification:-

Physical Dimensions	160*160*90mm
Enclosure	Cast Aluminum, Weather proof IP 65
Mounting	Field (Direct on Sensor)
Input Supply	230 V A.C.±15%
Display Range	0-999999.9 m3 /0-9999999 Liters
Flow rate sampling	2 Seconds
Resolution	0.01/0.1 Depending upon range
Accuracy	± 0.5 % FSD
Display	16*2 Alphanumeric LCD
Calibration/Set Point	Using front panel keypad
Linearity	± 0.5%
Output	RS 485/4-20 mA current (optional)
Sensor Type	Full Bore
MOC	Flange-Mild Steel Electrode SS316 Coil Housing- Mild Steel
Maximum Operating Pressure	10 kg./cm2
Process Temperatures	85 º C Max
Lining	Rubber
Conductivity	>5 µs/cm2
Process Connection	BS10 Table D Flanged