Magnetic Wet Drum Separator by Star Trace Private Limited, Chennai

Introduction:(Magnetic wet drum separator) STL is one of the leading manufacturers of ore dressing equipment(Magnetic wet drum separator). The present range of STL process equipment enables us to provide complete packages. Magnetic wet separators constitute an important part of the product range and are known for advanced engineering design and excellent performance.

Product models and sizes:
STL's wet permanent magnetic separators(Magnetic wet drum separator) are offered in sizes of dia.1200 mm and 916mm in Lengths of up to 3000mm. Three basic separator designs are available for cobbing, roughing and finishing/cleaning applications. Each type can be supplied in single drum or multiple drum stages of taconite or magnetite and also for recovery for magnetic medium in dense media plants. The stationary magnet yoke is an assembly of strontium-ferrite permanent ceramic magnets. (Magnetic wet drum separator)The rotating drum is available with optional rubber or stainless steel covers. The magnetic flux pattern will match the tank configuration for optimum performance. STL's magnetic wet separator dia 916 x 300 mm is the smallest full scale separator in the 916 series and is primarily used for pilot plant tests. The separator can be delivered in concurrent, countercurrent and counter rotation versions. (Magnetic wet drum separator)STL's magnetic wet separator for laboratory use have drum dimensions dia. 600 x 285 mm and dia.200 x 100 mm and are suitable for batch or continuous testing. The test results from the STL laboratory  separators correspond closely to those obtained in full scale operation.  Pilot unit dia. 916 x 300mm. Left.

(Magnetic wet drum separator)STL's magnetic wet separators have been developed in close cooperation with the Swedish mining industry for treatment of magnetite. A prime consideration in its advanced engineering design has been high capacity, improved metallurgical performance and highest availability. The separator is constructed as a separate unit consisting of drum with magnet yoke, tank and drive package, all mounted on a heavy-duty frame. The design of the frame allows any number of units to be connected in series as multi-stage installation. This design offers a flexible flow sheet layout.

The drum shell is made of non-magnetic stainless steel with abrasion-resistant wear cover and sealed heads of cast rigid aluminium alloy. The drum shaft runs in spherical, self-aligning antifriction bearings.

Adjustment of magnet yoke and drum:
The magnet yoke is mounted on the stationary drum shaft and its position can be adjusted (+/-35) by a lever at the end of the drum shaft to optimize runing conditions in accordance with tank design and type of ore. The gap between tank and drum, which determines the pulp  flow speed, can be adjusted vertically by shims inserted under the bearing housing and shaft support. Horizontal adjustment is by slotted holes.