Open Well Submersible Pump by CNP Pumps India Private Limited

Applications:

Lifting clean and clear water in deep wells, domestic, civil and industrial water supply, irrigation, sprinkler systems and pressure boosting.Operating ConditionsSolids and fiber free, dilute, clean, non-corrosive liquidsLiquid temperature : AmbientMaximum permissible content of suspended sand : 100gm/m³pH : 6.5~8.5Maximum start per hour : 30 at equal intervalsVoltage : 380-440V in three phase 200-230V in single phase (Low voltage motor available on demand)NEMA Motor3", 3.5" & 4" easily re-windable, water filled motor.3" Motor in cast iron (Standard), Stainless steel (on demand) Single phase : 0.37kW~1.1kW.3.5" Motor in cast iron (Standard), Stainless steel (on demand) Single phase : 0.55kW~1.5kW.4" Motor in cast iron (Standard), Stainless steel (on demand) Single phase : 0.37kW~2.2kW,Three phase : 0.75kW~7.5kW

Performance Conditions :
All performance data is based on the measured values of 50Hz motor with constant speed 2880 rpm at standard voltage conditions. Performance will change at low voltage.60Hz submersible bare pumps also available.All measurements are carried out with gas-free water of temperature 200C. In case density of the liquid conveyed by the pump is higher than that of water, it is necessary to use corresponding motor of higher output power.The highlighted part of the performance table is best efficiency zone which can minimize electric consumption and increase life for submersible pumpset.