Pressure Reducing Valves by Fluidyne Instruments Private Limited

Our pressure reducing valves can be most commonly used in relay operated systems. But however, for several applications SDF-operated control system is sufficient. Our specially designed pressure regulators are known as a pressure regulating valves. Control valves that do not use auxiliary power sources such as air and electricity are called as regulating valves. Our innovatively designed pressure valves directly receive power from the control system through pressure detecting means to actuate the valve. Key features of our high-quality pressure reducing valves are

• Pretty Cost effective because of high efficiency
• Simple and design make them easy to install.
• Requires very low maintenance.
• They are direct acting types valves which serve as the actuating means for operating the valve plugs.
• These valves can be custom designed as per specific requirements.

We have designed 4 different types of pressure regulators with varied pressure ranges. Installing these superior quality valves makes it possible to regulate the fluid pressure at a constant value. This is done on the inlet side of the valve, irrespective of fluctuation in load. The four pressure regulators, with their varied set pressure ranges are:

Primary Pressure Regulators	From 28 to 1.0Kg f/cm² g.
Secondary Pressure Regulators	From 10 to 1.0 Kg f/cm²g.
Differential Pressure Regulators	From 7 to 0 Kg f/cm²g.
Pilot Operated Type Secondary Pressure Regulators	From 22 to 0.5 Kg f/cm2.

Secondary Pressure Regulators
Installation of this valve makes it possible to regulate the fluid pressure at a constant value on the outlet side of the valve, irrespective of fluctuation in load. Set pressure is designed within a range of 10 to 1.0 Kg f/cm²g.

Differential Pressure Regulators
Installation of this valve makes it possible to regulate the pressure differential between the outlet (or the inlet) side of this valve and the line pressure of a different system at a constant value, irrespective of fluctuation in load. Set pressure is designed within a range of 7 to 0 Kg f/cm²g.

Pilot Operated Type Secondary Pressure Regulators
Installation of this valve makes it possible to regulate the fluid pressure at a constant value on the outlet side of the valve, irrespective of fluctuation in load. Set pressure varies for each model, but it is designed within a range of from 22 to 0.5 Kg f/cm2.