Standard Steel Framed Partition Everest Wall Board by Shah Interiors Inc

General DescriptionA non load bearing steel framed 66mm, 70mm & 74mm thick partition of a facing of both side of one layer of 8mm, 10mm & 12mm respectively
Main System : 66mm, 70mm & 74mm thick metal stud partition comprising of a facing of both side of one layer of 8mm, 10mm & 12mm Everest Wall Board screw respectively, fixed with 25 mm self tapping screws at 200 mm centers to a G. I. metal frame built up with 50 mm stud of 0.6 mm thick and having unequal flanges of 50mm X 48mm placed at 610 mm center to center in 50 mm floor and ceiling channel of anchored to floor and ceiling at 600 mm center where height of partition greater than length of the board. The edged of the board are to be backed by horizontal bracing members bridging the vertical studs. The facing boards are to be staggered to avoid coinciding on the same stud.
Boarding System : 8mm, 10mm or 12mm Everest Wall Board is then screwed to ceiling section with 25 mm drywall for 66mm, 70mm or 74mm thickness respectively, screws at 200 mm centers. Screw fixing is done mechanically either with screw driver of drilling machine with suitable attachment. The boarding is to be done keeping a gap of 2 mm from all sides of the boards and making a 3 mm tapered edge on the two sides of the boards.Jointing & Finishing : Finally the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the square edges of the boards with Lime & PVA based material with Fiber Tape.Partition System is generally based on factors like• Fire Protection• Sound Insulation• Thermal Conductivity / Thermal Resistance / Thermal Transmittance• Height of Partition